FAEN
AVASH / ACADEMYSPACE · SOUND · UNDERSTANDING

ARCHITECTURE MEETS ENGINEERING

Better understanding. Better design.

Technical articles and design guides. Understand the decisions behind the numbers, then explore them in our engineering tools.

Explore the guides ↓

THE READING ROOM

From an idea to a sound decision

09 / Practical guides
Industrial paging placement diagram comparing uncontrolled projection with distributed, audience-directed coverage5 min read
Industrial paging & speech intelligibility

Loud but unclear: why factory paging gets lost in production noise

Understand industrial paging intelligibility: reverberation, machinery noise, horn and projector transducers, aiming and distributed placement.

Read guide ↗
Hybrid Dante and 100 V industrial paging topology with fibre-connected local racks and parallel transducer circuits4 min read
Industrial audio networks & infrastructure

100 V or Dante for industrial paging? Designing a hybrid architecture

Compare 100 V distribution, Dante audio networking and hybrid industrial paging: fibre links, local racks, zoning, amplification and operation.

Read guide ↗
Hypothetical 90° and 120° cones: 3 m and 5.20 m diameters at 1.5 m effective height5 min read
Architecture & acoustic coverage

Acoustic blind spots: ceiling coverage angles and invisible audio

Why does clarity change across a room? Explore ceiling transducer dispersion, coaxial designs, invisible IV140 integration and practical coverage geometry.

Read guide ↗
7 min read
Networked audio & control

From EclerNet to EclerPLEX in 2026: twelve years of audio engineering experience and simpler system control

Twelve years of AVASH project experience inform a practical comparison of EclerNet, EclerPLEX, dynamic DSP and everyday control in commercial audio integration.

Read guide ↗
An AVASH commercial audio integration project2 min read
Equipment review

Ecler VIC8 and VIC8X: placement and power

Compare two 8-inch ceiling transducers and interpret an initial layout and line-load estimate.

Read guide ↗
Veek Boutique interior with pendant transducers in exposed ceiling architecture3 min read
Equipment review

eUC106, AMBIT-16 and eMOTUS5OD: installation and headroom

Compare pendant, surface-mount and outdoor Ecler transducers, with a practical explanation of amplifier headroom.

Read guide ↗
Pendant transducers within Veek Boutique’s exposed ceiling architecture2 min read
Spatial design

Planning transducer coverage for your space

A practical guide to ceiling transducer count, spacing and coverage at listener height.

Read guide ↗
Hamila project: architectural audio integration2 min read
Power & equipment

Headroom and amplifier selection

Separate continuous power, programme peaks and transducer limits with a clear headroom example.

Read guide ↗
Sana shopping centre: an AVASH commercial audio project2 min read
Cabling & installation

100 V line load and reserve capacity

Calculate transformer tap load and amplifier reserve, then account for cable losses.

Read guide ↗