AVASH ENGINEERING LAB
Engineering inputs. Spatial decisions.
Make data-driven decisions. Preview acoustic coverage, line load, and delay before selecting hardware.
Choose a tool ↓Choose a discipline, then a tool. Inputs and estimates stay together.
Estimate power for one transducer from target SPL, listening distance and headroom.
Estimated power with headroom
398.107 WEstimated power without headroom
100 WThe model assumes free-field propagation and sensitivity rated at 1 W / 1 m. The calculated power is not an equipment recommendation. Check transducer power handling, impedance, limiter settings and amplifier ratings separately. Headroom allows for signal peaks.
Estimate power from sensitivity, listener distance and target level; distinguish impedance loads from 70V and 100V line taps.
This is a preliminary engineering estimate. Confirm manufacturer references, installation conditions and equipment limits before specifying hardware. Coverage diagrams show geometric estimates rather than measured room SPL. Contact AVASH with your plan and inputs to request a project review or a PDF design report.
Request an engineering reviewSPL and distance attenuation guide →
Contact AVASH to review equipment choices and the conditions in your project.
Discuss your project →