POWERSOFT | Amplification and system management at installation scale
Selecting a Powersoft amplifier requires reading power alongside channel count, load type, processing, networking and operational requirements. This guide focuses on fixed-installation families, distinguishing them from touring products and OEM modules.
A family name does not define every variant’s capabilities. Product suffixes, particularly within Mezzo and Quattrocanali, matter when specifying Dante, AES67 and analogue connectivity.
UNICA is offered in four- and eight-channel formats with integrated processing, Dante and monitoring. Power Sharing enables flexible allocation, but channel limits, total available power and loading conditions must still be read from the specific model’s tables.
Mezzo includes two- and four-channel models. In the manufacturer’s current classification, A includes DSP, A+ adds AES67, and AD includes DSP with Dante/AES67. Check the exact suffix and firmware when planning an expansion.
These families provide other installation options. Quattrocanali DSP, DSP+ and DSP+D variants do not provide identical networking; verify AES67 and Dante support for the chosen version. Different generations should not be assumed to be drop-in replacements.
The wider portfolio also includes touring families such as T and X and modules intended for active-loudspeaker development. Their connectors, processing, transport requirements and service arrangements need a separate assessment.
ArmoníaPlus supports design, configuration and management of compatible equipment. Check preset compatibility, software version and control features per family; the DSP platforms are not identical.
For rack design, derive electrical demand and heat dissipation from the data sheet’s operating conditions. Summed output wattage does not replace calculations for mains current, cooling, backup power and load distribution.
The AVASH technical library contains Mezzo, UNICA and Quattrocanali documentation. No installation with an identified Powersoft model was recorded in the project data reviewed for this page. Projects using other brands are therefore not presented as Powersoft installation evidence.
Define loudspeaker power, impedance or transformer taps, headroom and cable length per zone. Match analogue or AoIP inputs, independent channels, monitoring and operator control. Distinguish allocatable amplifier power from loudspeaker power ratings.
No. A, A+ and AD variants differ. An Ethernet port alone does not establish Dante support.
No. Flexible allocation operates within total power, channel limits and permitted loading conditions. A load calculation is still required.
Provide the loudspeaker schedule, circuit types, zones and electrical/cooling constraints so that amplification and networking options can be compared.
Discuss a solution for your audio project →